Other Projector Model Compatibility Guide

 

PrintRecommended Fixed
Lens Attachment Kit
Projector Panamorph
Mode Names

e-vision-8000-3insight-laser-4k-1multiple projector models

Paladin lens for all models from 2014 through 2018

Projector prime lens must be used at 1.6:1 UltraWide throw ratio or higher. Beam spot must also be no larger than 72mm wide x 46mm high where it enters the lens

Paladin DCR Compatible. Insight models (must be used with Lumagen Radiance Pro 18GHz processor for anamorphic modes).

XMU

All projector models that are supported by a Chief RPA ceiling mount

 

XM2

When a larger ceiling mount is required such as Chief VCM, use XM2 and sandwich between projector and mount. 

UltraWide Mode
 “TheaterScope”

 

TV / 16:9 Mode
 “4:3 Narrow”

 

Phoenix ECC
NOT AVAILABLE

 

 

EpsonPageLogoRecommended Fixed
Lens Attachment Kit

Projector Panamorph
Mode Names

Epson-Projector-HomePagePro Cinema
6020UB, 6030UB
XM2

These Epson projectors have integrated Panamorph mounting holes for the XM2 kit

Use Phoenix or Paladin lens for all models

 

UltraWide Mode
 “Anamorphic Wide”

 

TV / 16:9 Mode
 “Horizontal Squeeze”

 

Phoenix ECC
“Panel Alignment”

Epson 6040Pro Cinema
6040UB
Epson LS10500Pro Cinema
LS9600, LS10000, LS10500

 

Benq-logoRecommended Fixed
Lens Attachment Kit

Projector Panamorph
Mode Names

w11000

W11000, X12000

(all 4K home theater projector models)

XM2
(modified)

When ordering, specify “W11000/X12000” in the order notes. An XM2 kit will be modified to fit the integrated Panamorph holes in the projector

Use only Paladin lens

UltraWide Mode
“Anamorphic 2.35:1”

TV / 16:9 Mode
 “Anamorphic 16:9”

Phoenix ECC
NOT AVAILABLE

 

sim2-logoRecommended Fixed
Lens Attachment Kit
Projector Panamorph
Mode Names

c3xlumis-b-34front-1

multiple projector models

All models from 2014 through 2017

Projector prime lens must be used at 1.6:1 UltraWide throw ratio or higher. Beam spot must also be no larger than 72mm wide x 46mm high where it enters the lens.

 

XMU

All projector models supported by a Chief RPA ceiling mount

 

XM2

When a larger ceiling mount is required such as Chief VCM, use XM2 and sandwich between projector and mount. 

.

Use only Paladin lens

UltraWide Mode
 “LetterBox”

TV / 16:9 Mode
 “4:3”

Phoenix ECC
NOT AVAILABLE